No-dig pipe repair on the Lower North Shore.
Cracked or root-damaged pipe repaired in place in Henley — a new liner cured inside the old pipe, so an established garden never has to come up.
No callout fee on eligible jobs · Free quotes
Henley is one of the smallest suburbs on this site — 156 dwellings, 75.6% separate houses and a further 20.5% on shared walls, with effectively no apartment stock. Nearly every drainage line here is private and runs beneath established planting on a river-frontage block. Where a shared line is involved, relining has a second advantage: nothing has to be dug on the neighbour’s side either.
A root mass at a joint under an established garden, and on the 20.5% of dwellings with shared walls, a run that serves two properties rather than one.
Because putting the garden back costs more than fixing the pipe. This is the part of a drainage repair people do not price until an excavator is already on site.
Established garden planting and river frontage reserves. On blocks this size the line is rarely far from something worth keeping, and on a shared run it can be worth keeping to two different owners.
A liner goes in through an opening that already exists. Nothing above the pipe has to move.
Southern riverfront of the Hunters Hill peninsula, where the lower blocks work near the water table. Small blocks also mean short street frontages and limited room for plant.
Henley sits in the Municipality of Hunter’s Hill, postcode 2111.
Local figures sourced from: ABS 2021 Census QuickStats — Henley · Municipality of Hunter’s Hill — constituent suburbs
Jointed earthenware of considerable age with newer sections spliced in where properties have been extended. On a suburb of 156 dwellings there is very little variation from that pattern.
No trench, no spoil, and nothing above the pipe disturbed. The whole job runs through an existing access point.
The line is inspected end to end so the damage is located and measured. Nothing is quoted from the surface.
Roots are cut out and the pipe wall is jetted back to bare material — a liner will not bond to a coated pipe.
A resin-saturated liner is drawn into position through an existing access point and inflated against the host pipe.
The resin hardens in hours rather than days, forming a new pipe inside the old one with no joints for roots to re-enter.
Any branch lines are cut back open robotically, and a final camera pass confirms the result.
Not every damaged pipe should be relined, and we will say so. These are the cases where it genuinely wins here.
No excavation on either property, and one less thing to agree.
Reinstatement is the larger half of a dig job here.
Trenching needs space these frontages do not offer.
Relining costs more per metre than excavation. It is usually cheaper overall, and this is why:
| Dig and replace | Relining | |
|---|---|---|
| Excavation | Trench the full length, remove and replace the pipe, backfill | None — the work runs through an existing access point |
| What comes up | Lawn, garden, paving, driveway or slab above the line | Nothing |
| Time on site | Days on a long or deep run | Usually one day for a typical run |
| Reinstatement | Priced separately and often the larger half of the bill | Not applicable |
| Result | New pipe, with joints | A jointless liner inside the host pipe |
| Design life | Depends on material and bedding | 50 years on a correctly installed liner |
The per-metre comparison is the one that misleads. Excavation quotes routinely exclude spoil removal and reinstatement, which is where a dig job gets expensive — and on some properties the reinstatement is simply not possible at any price.
These are typical ranges across the Sydney market — not Voyager’s price list, but a realistic yardstick to judge any quote against, including ours.
| Pipe relining, per lineal metre | $450 – $800 |
| Pipe relining, typical whole job | $4,000 – $10,000 |
| Patch repair, single damaged section | $1,500 – $3,000 |
| Junction reinstatement | $300 – $600 |
| Excavate and replace, per metre | $300 – $600 |
| Driveway reinstatement after a dig job, per sqm | $100 – $200 |
| CCTV drain inspection | $250 – $550 |
| Cutting tree roots from a line | $400 – $1,200 |
Voyager prices by the job, not by the hour, so the number you approve is the number you pay. A camera survey happens before any figure is given — a quote for relining that has not looked down the pipe is a guess.
Most Henley properties that ring about relining need a camera first. We will tell you straight — including when clearing the line is the whole job.
A correctly installed liner carries a 50-year design life, and it cures in hours rather than days — so the property is back in normal use the same week rather than the same month.
On a shared line a liner also removes a recurring dispute — a jointless pipe stops producing the annual question of whose blockage it is.
Roots come back through joints. A liner has none.
Voyager covers the whole Lower North Shore. These are the closest to Henley:
No. That is the whole point of it. The liner is drawn in through an existing access point — usually an inspection opening or shaft already on the property — and cured in place against the old pipe. It means nothing dug on either property where the line is shared, which removes most of what two owners would otherwise have to agree about.
Across the Sydney market, relining runs about $450–$800 per lineal metre, with a typical whole job landing between $4,000 and $10,000 and a single-section patch around $1,500–$3,000. Those are market ranges rather than Voyager’s price list. Reinstatement over mature riverfront planting, and whether a second owner is on the line. Neither is about the pipe, and both are settled more easily before work than after.
Per metre, no — excavation is cheaper per metre. Overall it usually is. The dig figure rarely includes putting the garden back, and on established planting that is routinely the larger half of the job. On some properties the reinstatement is not possible at any price, which settles it entirely.
A correctly installed liner carries a 50-year design life. It outlasts what it replaced because it has no joints along its length — and joints are where roots get in, where ground movement opens a gap, and where old earthenware fails first. Which means the garden above it is not being opened again in ten years.
A typical residential run is a single day on site, and the resin cures in hours rather than days. The camera survey happens first, either on the same visit or beforehand — nothing about a relining job should be quoted from the surface.
Most can, but not all — and we will say so rather than sell you something that will not work. A pipe that has collapsed completely, or lost so much of its shape that there is nothing left to line against, needs replacing. In Henley the host pipe is usually a good candidate: a root mass at a joint under an established garden, and on the 20.5% of dwellings with shared walls, a run that serves two properties rather than one.
Yes, and in Henley — where 20.5% of dwellings are semis or townhouses — it is often the easier path to agreement. Relining needs no excavation on either property, so the objections that usually stall a shared repair largely disappear. What still has to be settled is what the line serves and how the cost is split, which the camera survey helps establish.
Through that section, yes. Roots enter at joints and cracks; a liner is continuous and seals them, so the entry point is gone. Roots can still find a different fault further along an old line, which is why the survey covers the whole run rather than only the section that failed.
Camera survey first, a fixed price agreed before the work starts, and no excavation.
Voyager Plumbing · NSW Contractor Licence 476657C
Verify with NSW Fair Trading
Page reviewed and updated 20 August 2026
