Licensed local plumbers, on the Lower North Shore.
Blocked drains, hot water, leaks, gas and emergency repairs for Berowra Waters homes, businesses and strata — with a fixed price agreed before the work starts.
No callout fee on eligible jobs · Free quotes
A waterfront settlement on Berowra Creek, reached by a free three-lane punt that runs 24 hours a day. The road down to it opened in 1902.
100% separate houses across just 112 private dwellings — the smallest and most uniformly detached suburb Voyager services.
Waterfront properties at 7 metres elevation on a tidal creek. Drainage here works close to the water table, and getting equipment down is a genuine part of the job.
These jobs come up here more than they come up elsewhere. They follow from what Berowra Waters is built from, when it was built, and what it sits on.
The suburb is reached by a free three-lane punt across Berowra Creek. Whatever the job needs has to cross on it.
Winding roads climb steeply away from the water on either side, which limits what vehicles and equipment can realistically get down.
Waterfront properties on a tidal creek mean drainage sits close to the water table, and that changes both diagnosis and method.
Most repeat blockages are a pipe problem, not a blockage problem. We look before we quote.
Every job below is handled by a licensed plumber, quoted before it starts, and covered by the lifetime labour warranty on eligible work.
Cleared properly, with a camera down the line to find out why it blocked.
Fix a cracked or root-damaged pipe without digging up the garden.
Burst pipes, sewage overflows and gas faults — 24 hours a day.
Repairs and replacements across electric, gas, solar and heat pump.
Find a hidden leak before anyone opens a wall or a slab.
Licensed gas work — appliances, new lines and suspected faults.
See what is actually in the pipe instead of guessing at it.
Isolate, repair and make good — usually the same day.
Get roof and surface water away from the house properly.
Describe what’s happening at your Berowra Waters property and we’ll tell you straight — including when the simple fix is the whole job.
What a job looks like here depends on what the suburb is built from and built on. Start with how people actually live in it:
On Berowra Creek, a tributary of the Hawkesbury, with winding roads and hairpin bends climbing away on both sides.
Steep bushland on both banks, within the Berowra Valley catchment.
Berowra Waters sits in the Hornsby Shire, postcode 2082. Work needing a compliance certificate is lodged the same way across the LGA.
Local figures sourced from: ABS 2021 Census QuickStats — Berowra Waters · Berowra Waters, New South Wales — Wikipedia
Nobody likes ringing for a price and being told “it depends”. These are typical ranges across the Sydney market — not Voyager’s price list, but a realistic yardstick to judge any quote against, including ours.
| Drains and pipes | |
|---|---|
| Clearing a simple blockage | $150 – $400 |
| Clearing a blocked main sewer line | $300 – $600 |
| High-pressure jetting | $250 – $600 |
| Cutting tree roots from a line | $400 – $1,200 |
| CCTV drain inspection | $250 – $550 |
| Pipe relining, per lineal metre | $450 – $800 |
| Pipe relining, typical whole job | $4,000 – $10,000 |
| Excavate and replace, per metre | $300 – $600 |
| Repairs | |
| Leaking tap — washer or cartridge | $120 – $250 |
| Burst pipe, accessible | $250 – $500 |
| Burst pipe, underground | $800 – $2,500+ |
| Hot water, leaks and emergencies | |
| Hot water repair (element, thermostat, anode) | $150 – $550 |
| Hot water replaced, supplied and installed | $1,200 – $3,500 |
| Water leak detection | $250 – $600 |
| After-hours emergency attendance | $400 – $900 |
Hot water replacement above is supplied and installed — labour-only quotes look cheaper because they are not the same thing. And relining costs more per metre than digging, but that comparison ignores excavation, spoil removal and putting your driveway back, which is where dig jobs get expensive.
Voyager prices by the job, not by the hour, so the number you approve is the number you pay.
Berowra Waters is 100.0% freestanding houses, so the ownership question here is usually straightforward — and worth knowing, because it decides who pays.
You are responsible for the wastewater pipes between your property and the point of connection to the network. Sydney Water is responsible for the main that carries waste away from multiple properties. Most of the pipe that can actually fail on a block like yours is yours to maintain.
On a detached block the fault can be anywhere along a long private run, so locating it accurately is most of the job. A camera and a pipe locator turn a whole-yard excavation into a targeted repair.
Some problems wait for a booking. Burst pipes, sewage backing up, a hot water unit emptying itself into the floor and any suspected gas fault do not.
Voyager runs a 24/7 line for Berowra Waters and the rest of the Lower North Shore. When you call, say what’s happening, where it is, and whether water, sewage or gas is involved — that’s what decides how fast someone needs to be there.
Before we arrive: turn off the affected supply if it’s safe to do so, and move what you can away from the water. Don’t pour drain chemicals down a blocked line — it makes the pipe unsafe to inspect and rarely clears the blockage.
The free 24/7 punt across Berowra Creek, then hairpin bends climbing away on both sides. We confirm what can physically get down before quoting — this is the hardest access in the whole service area.
We assess access before quoting rather than discovering it on the day. On constrained sites it often decides which repair method is realistic, and that changes the price.
Storm season finds every drain that was never quite right. Better to know before it rains.
A short call is usually enough to tell whether it’s urgent, and what’s likely to be involved.
Where it matters, that means a camera down the line rather than a guess from the surface.
Priced by the job, not the hour. You approve it before anything starts.
You get told what caused it and whether anything else needs attention — including when the answer is nothing.
Voyager covers the whole Lower North Shore. These are the closest to Berowra Waters:
Voyager runs 24/7 for urgent work in Berowra Waters. How fast depends on where crews are at the time, but genuine emergencies — burst pipes, sewage overflows, suspected gas — are prioritised over booked jobs. Call 0485 028 787 and describe what’s happening.
The punt is part of the job. The suburb is reached by a free three-lane punt across Berowra Creek. Whatever the job needs has to cross on it.
In Berowra Waters, where 100.0% of homes are freestanding, you are responsible for the wastewater pipes between your property and the point of connection. Sydney Water maintains the main. Because that point is not always inside your boundary, a Sewer Service Diagram is the reliable way to know where your pipework actually runs.
There’s no callout fee on eligible jobs, and quotes are free. You get a fixed price for the work before anything starts — priced by the job, not by the hour, so a job that takes longer than expected doesn’t cost you more.
Usually because the blockage was cleared but the cause wasn’t found. Waterfront properties at 7 metres elevation on a tidal creek. Drainage here works close to the water table, and getting equipment down is a genuine part of the job. A camera inspection shows whether you’re dealing with a one-off or a damaged pipe that will keep catching.
The free 24/7 punt across Berowra Creek, then hairpin bends climbing away on both sides. We confirm what can physically get down before quoting — this is the hardest access in the whole service area. We work that out before quoting, because on constrained sites it decides which repair method is realistic.
Often not. The punt and the hairpin bends are not a detail — they decide what can physically be brought to a job here, and that shapes the method before anything else. Relining repairs the pipe from the inside, which leaves driveways, paving and established gardens intact. Whether it suits your pipe depends on its condition — that’s what the camera inspection determines.
Across the Sydney market a simple blockage runs $150–$400, jetting a main line $250–$600, and pipe relining $450–$800 per lineal metre with most whole jobs landing between $4,000 and $10,000. Those are market ranges rather than Voyager’s price list. Access dominates completely. Everything crosses on the punt and comes down hairpin bends, so what can physically be brought to the job limits the method — and the method sets the price. Voyager prices by the job, not the hour, and the price is agreed before work starts.
Yes — Voyager Plumbing holds NSW Contractor Licence 476657C, which you can check directly on the NSW Fair Trading register. All work is carried out by licensed plumbers and covered by public liability insurance.
Free quote, a fixed price agreed before the work starts, and someone on the end of the phone at any hour.
Voyager Plumbing · NSW Contractor Licence 476657C
Verify with NSW Fair Trading
Page reviewed and updated 13 August 2026
