Licensed local plumbers, on the Lower North Shore.
Blocked drains, hot water, leaks, gas and emergency repairs for Melrose Park homes, businesses and strata — with a fixed price agreed before the work starts.
No callout fee on eligible jobs · Free quotes
A small suburb on the southern side of the Parramatta River, undergoing substantial apartment redevelopment on former industrial land.
64.4% separate houses and 30.6% flats across just 835 dwellings — a small suburb changing shape quickly.
Older detached housing alongside new apartment developments, so the drainage under one block can be sixty years newer than the next.
These jobs come up here more than they come up elsewhere. They follow from what Melrose Park is built from, when it was built, and what it sits on.
64.4% houses and 30.6% flats across only 835 dwellings, with new apartment stock going up on former industrial land beside much older housing.
Melrose Park is in the City of Parramatta, not Ryde — which matters for anything requiring council involvement.
Low-lying land near the Parramatta River means less fall to work with than on the ridge.
Most repeat blockages are a pipe problem, not a blockage problem. We look before we quote.
Every job below is handled by a licensed plumber, quoted before it starts, and covered by the lifetime labour warranty on eligible work.
Cleared properly, with a camera down the line to find out why it blocked.
Fix a cracked or root-damaged pipe without digging up the garden.
Burst pipes, sewage overflows and gas faults — 24 hours a day.
Repairs and replacements across electric, gas, solar and heat pump.
Find a hidden leak before anyone opens a wall or a slab.
Licensed gas work — appliances, new lines and suspected faults.
See what is actually in the pipe instead of guessing at it.
Isolate, repair and make good — usually the same day.
Get roof and surface water away from the house properly.
Describe what’s happening at your Melrose Park property and we’ll tell you straight — including when the simple fix is the whole job.
What a job looks like here depends on what the suburb is built from and built on. Start with how people actually live in it:
On the Parramatta River within the City of Parramatta, across the water from Meadowbank.
Riverside parkland on the northern edge.
Melrose Park sits in the City of Parramatta, postcode 2114. Work needing a compliance certificate is lodged the same way across the LGA.
Local figures sourced from: ABS 2021 Census QuickStats — Melrose Park
Nobody likes ringing for a price and being told “it depends”. These are typical ranges across the Sydney market — not Voyager’s price list, but a realistic yardstick to judge any quote against, including ours.
| Drains and pipes | |
|---|---|
| Clearing a simple blockage | $150 – $400 |
| Clearing a blocked main sewer line | $300 – $600 |
| High-pressure jetting | $250 – $600 |
| Cutting tree roots from a line | $400 – $1,200 |
| CCTV drain inspection | $250 – $550 |
| Pipe relining, per lineal metre | $450 – $800 |
| Pipe relining, typical whole job | $4,000 – $10,000 |
| Excavate and replace, per metre | $300 – $600 |
| Repairs | |
| Leaking tap — washer or cartridge | $120 – $250 |
| Burst pipe, accessible | $250 – $500 |
| Burst pipe, underground | $800 – $2,500+ |
| Hot water, leaks and emergencies | |
| Hot water repair (element, thermostat, anode) | $150 – $550 |
| Hot water replaced, supplied and installed | $1,200 – $3,500 |
| Water leak detection | $250 – $600 |
| After-hours emergency attendance | $400 – $900 |
Hot water replacement above is supplied and installed — labour-only quotes look cheaper because they are not the same thing. And relining costs more per metre than digging, but that comparison ignores excavation, spoil removal and putting your driveway back, which is where dig jobs get expensive.
Voyager prices by the job, not by the hour, so the number you approve is the number you pay.
Melrose Park is genuinely mixed — 64.4% separate houses, 30.6% flats or apartments and 5.0% semis or townhouses — so the answer depends on which of those you are in.
In a freestanding house: you are responsible for the wastewater pipes between your property and the point of connection. Sydney Water maintains the main. A Sewer Service Diagram shows where your private pipework actually runs.
In a strata block: section 106 of the Strata Schemes Management Act 2015 (NSW) makes the owners corporation responsible for common property — generally any pipe serving more than one lot.
Sources: Sydney Water — maintaining your service · Strata Schemes Management Act 2015 (NSW)
Some problems wait for a booking. Burst pipes, sewage backing up, a hot water unit emptying itself into the floor and any suspected gas fault do not.
Voyager runs a 24/7 line for Melrose Park and the rest of the Lower North Shore. When you call, say what’s happening, where it is, and whether water, sewage or gas is involved — that’s what decides how fast someone needs to be there.
Before we arrive: turn off the affected supply if it’s safe to do so, and move what you can away from the water. Don’t pour drain chemicals down a blocked line — it makes the pipe unsafe to inspect and rarely clears the blockage.
New developments are well set up for service access; the older detached blocks are ordinary suburban access.
We assess access before quoting rather than discovering it on the day. On constrained sites it often decides which repair method is realistic, and that changes the price.
Storm season finds every drain that was never quite right. Better to know before it rains.
A short call is usually enough to tell whether it’s urgent, and what’s likely to be involved.
Where it matters, that means a camera down the line rather than a guess from the surface.
Priced by the job, not the hour. You approve it before anything starts.
You get told what caused it and whether anything else needs attention — including when the answer is nothing.
Voyager covers the whole Lower North Shore. These are the closest to Melrose Park:
Voyager runs 24/7 for urgent work in Melrose Park. How fast depends on where crews are at the time, but genuine emergencies — burst pipes, sewage overflows, suspected gas — are prioritised over booked jobs. Call 0485 028 787 and describe what’s happening.
Two eras in a small suburb. 64.4% houses and 30.6% flats across only 835 dwellings, with new apartment stock going up on former industrial land beside much older housing.
It depends which kind of property you are in — Melrose Park is 64.4% houses and 30.6% apartments. In a house you maintain the pipes from your property to the point of connection, and Sydney Water maintains the main. In a strata block, common property is the owners corporation’s. Villas and townhouses are the grey area and worth checking first.
There’s no callout fee on eligible jobs, and quotes are free. You get a fixed price for the work before anything starts — priced by the job, not by the hour, so a job that takes longer than expected doesn’t cost you more.
Usually because the blockage was cleared but the cause wasn’t found. Older detached housing alongside new apartment developments, so the drainage under one block can be sixty years newer than the next. A camera inspection shows whether you’re dealing with a one-off or a damaged pipe that will keep catching.
New developments are well set up for service access; the older detached blocks are ordinary suburban access. We work that out before quoting, because on constrained sites it decides which repair method is realistic.
Often not. Melrose Park is one of the few suburbs here in the City of Parramatta rather than Ryde, and it is redeveloping fast — old and brand-new drainage in the same streets. Relining repairs the pipe from the inside, which leaves driveways, paving and established gardens intact. Whether it suits your pipe depends on its condition — that’s what the camera inspection determines.
Across the Sydney market a simple blockage runs $150–$400, jetting a main line $250–$600, and pipe relining $450–$800 per lineal metre with most whole jobs landing between $4,000 and $10,000. Those are market ranges rather than Voyager’s price list. Old and very new drainage in the same small suburb, so what is under a property varies enormously. Council involvement goes through Parramatta rather than Ryde. Voyager prices by the job, not the hour, and the price is agreed before work starts.
Yes — Voyager Plumbing holds NSW Contractor Licence 476657C, which you can check directly on the NSW Fair Trading register. All work is carried out by licensed plumbers and covered by public liability insurance.
Free quote, a fixed price agreed before the work starts, and someone on the end of the phone at any hour.
Voyager Plumbing · NSW Contractor Licence 476657C
Verify with NSW Fair Trading
Page reviewed and updated 13 August 2026
